Description
Combining the natural, timeless softness of wood with the contemporary design of metal, this table lamp is as useful as it is decorative, and will look great on a desk, bedside table or any other piece of furniture.
Its white metal colour and beechwood base will add a cheerful, trendy look to your space.
This lamp is fully shielded, from the bulb to the mains plug, including shade basket and G9 LED bulb.
Thanks to its swan neck, the lamp can be turned in any direction.
Technical data
Shade colour: white, powder-coated
Base: beechwood
Cable length: approx. 180 cm white
Shielded mains connection: angled protective contact plug DIN 49441
Switch: 1-pole (shielded)
Operating voltage: 230 VAC / 50 Hz
Dimensions: see sketch
Light source: E14, LED-G9-5.5 W, 485 lm
Protection class: 1 (with protective conductor)
AC electric field shielding: shielded supply cable (aluminium tape, double wire, shielding cage)
Shielding basket: stainless steel spiral with E14 screw ring
Shielding against alternating magnetic fields: shock 10 cable (wires separated ten times per metre, twisted together)
Tested in accordance with: TCO‘99 (MPR II, DIN EN 50279) Lower limit values by a factor of 20 or more for all measurement methods, individually at 100%
Scope of supply
Luminaire with G9-LED-5.5 light source and Shade basket
Safety instructions
All electrical work (work on electrical equipment and installations) must be carried out and checked by or under the supervision of a qualified electrician!
Only use your lamp in dry indoor rooms at normal temperatures. Do not use outdoors!
Getting started
1. remove the product from its packaging
2. insert the G9 bulb
3. plug the cable into the socket
4. switch on and off using the rocker switch.
A slight tilt in the shade can be compensated for by adjusting the lighting. by carefully bending the metal frame.
Important note:
Always unplug the bulb before carrying out any work on it! In the case of a G9 high-voltage halogen bulb, allow it to cool before removing it!
1. push the shade basket down from the top
2. remove the defective bulb and insert the new one. Insert the bulb. Slide the basket slowly upwards out of the lampshade.
When using a G9 high-voltage bulb, the maximum wattage is 20W!
There is no limit for LED bulbs.
