Description
Earthing cable with eyelets for desk for stationary use
For secure earthing of desk frames, cable ducts, decorative mouldings and other electrically conductive constructions.
For simple screwing onto the earthing plug adapter.
Transparent cable 2.5 mm² – 350 cm – 2 x eyelet M4 / 2.5 mm²
A 3.5 metre long transparent earthing cable with an M4 / 2.5 mm² eyelet at each end.
Earthing cable for connection to the earthing plug adapter. For secure contacting of desk frames, cable ducts, decorative mouldings and other electrically conductive structures or surfaces.
IMPORTANT!
ATTENTION: The necessary installation must be carried out by a qualified electrician. A residual current circuit breaker (FI, RCD ≤ 30mA) must be present in the circuit. This device is a standard part of every electrical installation and will be installed by your electrician if not already present.
All electrical work (work on electrical appliances and systems) must be carried out and checked by a qualified electrician or under their supervision and guidance!
Only use your cable in dry indoor areas at normal temperatures.
Do not use outdoors!
Colour: transparent
Length: 350 cm
Cross-section 2.5 mm²
Instructions for use
Connect the M4 ring of the connection cable to the adapter (Torx T20) using the screwing aid and one of the supplied M4 x 6 mm Torx screws.
Switch off the electrical circuit to the socket using the fuse.
Remove the central screw from the socket.
Connect the plug to the socket by fitting the adapter first.
If necessary, use the longer M2.5 or M3 x 35 mm central screw supplied.
Secure the cover with the two M4 x 8 mm Torx screws supplied.
Now the other side of the earthing kit can be fitted and connected.
The power socket is no longer available for the use of electrical consumers.
