Description
Earthing cable for safe earthing of movable, loosely laid shielding materials, e.g. textiles, fleeces, building fabrics, etc.
Transparent, PVC-insulated earthing cable.
For easy screwing onto the earthing plug Schukoadapter.
Earthing of electrically conductive shielding materials by means of earthing connection systems specially developed for this purpose.
Since the electrically conductive LF and HF shielding materials couple to the low-frequency alternating electric fields present in the room, the field charge increases.
It is possible to reduce the EWF by replacing unshielded with e.g. shielded connection/extension cables, socket strips and workplace lights. The use of these connection and consumption devices is also possible in other areas/rooms where people stay for longer periods of time.
Technical data
Colour: transparent
length: 350 cm
Connection: stable crimped ring eyelet 5mm (M5) + push-button upper and lower part
Cross-section: 2.5 mm²
Important information ATTENTION:The necessary installation must be carried out by a qualified electrician. There must be a residual current circuit breaker (FI or RCD) in the circuit.
All electrical work (work on electrical devices and systems) must be carried out and checked by a qualified electrician or under their direction and supervision! Use your line only in normally tempered, dry indoor rooms. No outdoor use! We will be happy to provide the electrician of your choice with further information.
Operating instructions
Installation is simple. Simply bend the tips of the lower part of the push button downwards by 90° and push them carefully through the shielding material.
Then bend the tips 90° again to permanently attach the lower part of the push button to the shielding material.
After gluing the supplied protective pad onto the bent tips, the upper part of the push button is connected to the attached lower part.
Connect the M4 ring of the connection cable to the adapter (Torx T20). Use the screwing aid with one of the M4 x 6 mm Torx screws supplied.
Disconnect the power circuit of the socket using the fuse.
Remove the centre screw from the socket.
Connect the plug to the socket outlet by first attaching the adapter. Use the longer M2.5 or M3 x 35 mm centre screw supplied as required.
Fasten the cover with the two M4 x 8 mm Torx screws supplied.
The other side of the earthing set can now be fitted and connected.
The socket outlet is no longer available for the operation of electrical loads.
